Gateway 600YG2 Supplementary Manual
12
Replacing Components in Your Gateway 600YG2
www.gateway.com
7
Hold the new or replacement module at a 30-degree angle and press it into
the empty memory slot. This module is keyed so that it can only be inserted
in one direction. If the module does not fit, make sure that the notch in
the module lines up with the tab in the memory slot.
the empty memory slot. This module is keyed so that it can only be inserted
in one direction. If the module does not fit, make sure that the notch in
the module lines up with the tab in the memory slot.
8
Press the module down until it clicks into place.
9
Replace the memory cover, then tighten the captive screw.