Gateway 4012gz Reference Guide
www.gateway.com
99
10
Pull the memory module out of the slot.
11
Hold the new or replacement module at a 30-degree
angle and press it into the empty memory slot. This
module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory
bay.
angle and press it into the empty memory slot. This
module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory
bay.
12
Replace the memory bay cover, then tighten the cover
screws.
screws.
13
Replace the keyboard screw.
14
Insert the battery, then turn your notebook over.
15
Connect the power adapter, modem cable, and network
cable.
cable.
16
Reconnect all peripheral devices and replace any
PC Cards or Express Cards.
PC Cards or Express Cards.
Tip
The screw hole is marked with a K.