Gateway 4012gz Reference Guide

Page of 158
www.gateway.com
77
Cotton swabs
A CD or DVD drive cleaning kit
Cleaning the exterior
Always turn off your notebook and other peripherals before 
cleaning any components. Also, remove the battery before 
cleaning any components.
Use a damp, lint-free cloth to clean your notebook and other 
parts of your system. Do not use household abrasive or solvent 
cleaners because they can damage the finish on components.
Your notebook is cooled by air circulated through the vents on 
the case, so keep the vents free of dust. With your notebook 
turned off and unplugged, brush the dust away from the vents 
with a damp cloth. Be careful not to drip any water into the 
vents. Do not attempt to clean dust from the inside of your 
notebook with the exception of the memory bay.
Cleaning the keyboard
You should clean the keyboard occasionally by using an aerosol 
can of air with a narrow, straw-like extension to remove dust 
and lint trapped under the keys.
If you spill liquid on the keyboard, turn off your notebook and 
turn the notebook upside down. Let the liquid drain, then let 
the keyboard dry before trying to use it again. If the keyboard 
does not work after it dries, you may need to replace it. A 
replacement keyboard may not be covered by your warranty.
Cleaning the notebook screen
Use a soft cloth and water to clean the LCD screen. Squirt a little 
water on the cloth (never directly on the screen), and wipe the 
screen with the cloth.
Warning
When you shut down your notebook, the power turns off, but some 
electrical current still flows through your notebook. To avoid possible injury from 
electrical shock, unplug the power cord, modem cable, and network cable from 
the wall outlets and remove the battery.
Tip
You may want to occasionally open the memory bay door and remove 
dust and lint using an aerosol can of air.
Caution
A notebook LCD screen is made of specially coated glass and can be 
scratched or damaged by abrasive or ammonia-based glass cleaners.