Gateway fx530 Reference Guide
www.gateway.com
37
4
If your monitor has a DVI connection, connect your
monitor’s DVI cable to the longer of the two DVI cables.
monitor’s DVI cable to the longer of the two DVI cables.
- OR -
If your monitor has only a VGA connection, connect the
DVI-to-VGA adapter to the longer of the two DVI cables,
then connect your monitor’s VGA cable to the adapter.
DVI-to-VGA adapter to the longer of the two DVI cables,
then connect your monitor’s VGA cable to the adapter.
Enabling CrossFire
To increase graphics performance, CrossFire graphics cards let
you divide graphics tasks between two cards, then send the
combined signals to a single monitor. Graphics tasks can be
shared in several ways, and each has its own advantages,
depending on the program you are running and the type of
monitor you have.
To use this increased performance, you must first enable
CrossFire.
you divide graphics tasks between two cards, then send the
combined signals to a single monitor. Graphics tasks can be
shared in several ways, and each has its own advantages,
depending on the program you are running and the type of
monitor you have.
To use this increased performance, you must first enable
CrossFire.
Help
For the latest information on setting up your CrossFire video
cards, see
www.ati.com/crossfire
. For help on topics not covered here,
see the ATI Catalyst Control Center’s online help.
DVI connector
8512280.book Page 37 Monday, March 26, 2007 4:25 PM