Sony KP 43T90 Manual

Connect the cable from the satellite
antenna to the satellite receiver.

Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.

Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.

Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the VCR.

Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).

If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.

Note:
• To view input from the satellite receiver or

VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/VIDEO on the remote
control.