Sony kd-32fs130 Manual
11
R
e
m
o
te
C
ont
ont
ro
l
Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR
combination unit) that you want to control with the TV’s remote control, use the following
procedure to program the remote control.
combination unit) that you want to control with the TV’s remote control, use the following
procedure to program the remote control.
1
Check the list of “Manufacturer’s Codes” on page 12 and find the three-digit code number
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
2
Press .
3
Press
or
FUNCTION
button to indicate the type of component you want to
program with the remote control.
4
Use the
buttons to enter the three-digit manufacturer’s code number.
5
Press .
6
To check if the code number works, aim the TV’s remote control at the component and
press the green
press the green
POWER
button (
VCR/DVD
,
SAT/CABLE
) that corresponds with that
component. If it responds, you are done. If not try using another code listed for that
manufacturer.
manufacturer.
✍
The
and
FUNCTION
button flash when you press
.
✍
You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
✍
If you have problems programming your remote control, see the remote control troubleshooting
section on page 60.
section on page 60.
0
9
01US01COV-BR2.book Page 11 Monday, March 28, 2005 1:36 PM