Sony kd-32fs130 Manual
16
C
onne
c
ti
o
n
s
Basic Connections
TV with Cable, Indoor, or Outdoor Antenna
Depending on the cable system available in your home, choose one of the connections below:
Use option B to connect the TV to a dipole antenna, also known as a “rabbit ears antenna“
(usually found in older homes).
(usually found in older homes).
Connecting Two RF Inputs
If you want to watch RF signals for both antenna (over-the-air) and cable broadcast signals,
you’ll need to use an optional A-B switch for RF inputs (not supplied), as shown below.
you’ll need to use an optional A-B switch for RF inputs (not supplied), as shown below.
✍
Converter EAC-25 is commercially known as a 300-to-75 ohm antenna adapter.
✍
If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the
antenna for the best reception.
antenna for the best reception.
✍
For best results, be sure to use an RF switch, as shown above, instead of a simple splitter.
Use option A to connect the TV to a cable system or an antenna with a 75-ohm cable
(usually built into newer homes).
(usually built into newer homes).
A
B
Cable
Antenna
RF Switch
A/B
Use the A-B selector to switch between the
over-the-air signals and the cable signals.
Then set the Cable setting in the Channel
Setup menu to On or Off, as described on
page 41.
over-the-air signals and the cable signals.
Then set the Cable setting in the Channel
Setup menu to On or Off, as described on
page 41.
01US01COV-BR2.book Page 16 Monday, March 28, 2005 1:36 PM