Sony kd-32fs130 Manual
59
O
th
e
r I
n
fo
rmat
io
n
Other Information
Troubleshooting
If you have a problem with your TV, try the suggestions below. If the problem persists, see
“Contacting Sony” at the end of this section.
“Contacting Sony” at the end of this section.
General
Problem
Possible Remedies
I want to reset the TV
to the factory
settings
to the factory
settings
❏
Turn on the TV. While holding down the
button on the
remote control, press the
POWER
button on the TV front panel.
The TV will turn itself off, then back on again. Release the
button.
The TV is dirty
❏
Clean the TV with a soft dry cloth. Never use strong solvents
such as thinner or benzine, which might damage the finish of
the cabinet.
such as thinner or benzine, which might damage the finish of
the cabinet.
I lost the parental
control password
control password
❏
In the password screen, enter the following master password:
4357
. After using the master password, you must create a new
password. You cannot use the master to unlock currently
blocked channels.
blocked channels.
There is a black box
on the screen
on the screen
❏
You have selected a text option in the Setup menu (page 50) and
no text is available. To turn off this feature, select Off in the
Caption Vision option. If you were trying to select closed
captioning, select CC1-4 instead of Text1-4.
no text is available. To turn off this feature, select Off in the
Caption Vision option. If you were trying to select closed
captioning, select CC1-4 instead of Text1-4.
There was a blackout
or power outage, and
now the TV won't turn
on and the timer LED
is flashing
or power outage, and
now the TV won't turn
on and the timer LED
is flashing
❏
Press the
POWER
button on your remote control or on the TV
front panel. If the problem persists, see “Contacting Sony” on
page 62.
page 62.
The digital cable box
does not work
does not work
❏
If you are connecting a VCR and digital cable box using a
splitter, as described on page 19, you must use a special bi-
directional splitter (5-900 Mhz minimum) that is designed to
work with your digital cable box.
splitter, as described on page 19, you must use a special bi-
directional splitter (5-900 Mhz minimum) that is designed to
work with your digital cable box.
I can’t connect the
DVD player using
component video
outputs (Y P
DVD player using
component video
outputs (Y P
B
P
R
)
❏
You must set up your DVD player before you can connect it
using component video outputs (Y P
using component video outputs (Y P
B
P
R
). Disconnect the DVD
player and set it up, referring to the DVD manual for
instructions. Then, connect it to the TV again following the
instructions on page 24.
instructions. Then, connect it to the TV again following the
instructions on page 24.
RESET
RESET
01US01COV-BR2.book Page 59 Monday, March 28, 2005 1:36 PM