Sony klv-15sr1 Quick Setup Guide

Remote Control
RM-932 (1)

Coaxial cable (1)

Cleaning cloth (1)

Operating Instructions
(1)

To put the cables in the stand

You can put the aerial cable, AC power adapter cable and
Scart cable in the stand.

Pull the upper edge of

the cable cover
toward you and
remove it.

Pass the cables into

the stand.

Replace the cable

cover while aligning
the claws on the cover
with the holes on the
stand.

Note
• The other cables may not be put in the stand.

To adjust the TV angle

You can adjust the angle of the TV for easy viewing.

Carrying the TV

• Before carrying the TV, disconnect all the cables from the

TV. If it drops, a serious injury may result.

• When you carry the TV for repair or moving, pack it

using the original carton and packing material.

• When you carry the TV by hand, hold it at the top and

bottom. Do not hold the rear cover only.

To play a video tape, press t on the remote.

Note
• For connecting a VCR to the t 2 connectors, see “Connecting optional

components” on page 11 of the Operating Instructions.

Connect the AC cable

To connect the TV to the mains, use the supplied AC power adapter
and AC cable.

Note
• Do not remove the ferrite core from the AC power adapter.

16.5V

L/G/S/I

R/D/D/D

To remove the rear cover

Hold the rear cover as
illustrated, and slide it
upward by about 10
mm.

Pull the rear cover
toward you.

To replace the rear cover

Hold the rear cover as
illustrated, and align
the four projections on
the rear cover with the
hook holes on the TV.
(The rear cover may
protrude from the TV
by about 10 mm.)

While pushing the rear
cover toward the TV,
slide it downward.

Note
• When you carry the TV, do not hold the rear cover only, as the rear cover

can easily come off.

Batteries (R6 Type) (2)

AC Cable (Type C) (1)

• Use this AC cable

(with safety earth) if
you use the set
outside the United
Kingdom.

KLV-17HR1

KLV-15SR1

Quick Start Guide

Thank you for purchasing this Sony
product.

After following this step by step
guide you will be able to:

— Remove the Rear Cover.

— Connect the Aerial, VCR and AC

Cable to your TV.

— Insert Batteries into the Remote.

— Select the Language of the Menu

Screens.

— Select the Country in which You

Wish to Operate your TV.

— Tune your TV.

— Change the Programme Order of

the Broadcast Channels.

Now you are ready for viewing TV
programmes.

Removing the Rear Cover

Before connecting an aerial and cables, remove
the cover at the rear of your TV. Replace the
cover after all the connections are complete.

Connecting the Aerial,
VCR and AC Cable

Do not remove
ferrite cores.

Connect the aerial

CAUTION

Do not connect the power cord until all other connections are
complete; otherwise, a minimal current leakage through the aerial
and/or other terminals to the ground could occur.

Connect a VCR

: Signal flow

IEC connector

Aerial cable
(supplied)

Rear of TV

To 8 (aerial)

Scart cable
(not supplied)

: Signal flow

To i 1/

VCR

Aerial cable
(supplied)

To aerial output

To 8 (aerial)

Rear of TV

To 16.5 V

AC power adapter
(supplied)

AC cable
(supplied)

To mains

3° forward

Right side

15° backward

Note
• Do not use old batteries or different types of batteries together.

Pull here.

Cable cover

Inserting Batteries into
the Remote

4-092-620-11 (1)

Checking the Supplied
Accessories

AC power adapter (1)

AC Cable (Type BF) (1)

• Use this AC cable (with

safety earth) if you use
the set in the United
Kingdom or Hong
Kong.

• See “NOTICE FOR

CUSTOMERS IN THE
UNITED KINGDOM”
on page 2 of the
Operating Instructions
when using the cable.

Rear of TV