Sony KLV-32M1 User Guide

30

S VIDEO cable
(not supplied)

DVD Player

A/V cable

(not supplied)

Rear of TV

S VIDEO

AUDIO-R (red)

AUDIO-L (white)

VIDEO (yellow)

Use this hookup if:

• Your DVD player does not have component (Y, P

B

, P

R

) jacks.

• If your DVD player has component video output connectors, for best picture quality, use the

connection described on page 29.

• The Y, P

B

 and P

R

 jacks on your DVD player are sometimes labeled as Y, C

B

 and C

R

, or

Y, B-Y and R-Y. If so, connect the cables to the matching colors.

• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to

16:9 on your DVD player. For details, refer to the operating instructions supplied with your
DVD player.

Using an A/V cable, connect the DVD player’s AUDIO OUT jacks to the
TV’s AUDIO IN jacks.

Using an S VIDEO cable, connect the DVD player’s S VIDEO OUT jack
to the TV’s S VIDEO IN jack (VIDEO 1 IN or VIDEO 3 IN).

If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.

When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure
“Auto YC” in the 

 (Setup) menu is set to “On” to view the S VIDEO input (see page 25).

• You can also use the VIDEO 2 IN jacks located on the front of the TV to connect your

DVD player.

• Use VIDEO 1/2/3 on the remote control to switch to the DVD player input.