Sony kv-20fv300 Manual
Connecting Your TV
9
TV, Satellite Receiver, and VCR
1
Connect the cable from your satellite antenna to SATELLITE IN on the satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
jack on your TV.
4
Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your VCR.
satellite receiver to AUDIO and VIDEO IN on your VCR.
5
Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your VCR
to AUDIO and VIDEO IN on your TV.
to AUDIO and VIDEO IN on your TV.
To view from the satellite receiver or VCR, select the video input to which your satellite
receiver or VCR is connected by pressing
receiver or VCR is connected by pressing
on the remote control.
Satellite Receiver
4
5
2
3
1
Rear of TV
VCR
Satellite
antenna
From
antenna
cable/
cable
Video (yellow)
Audio R (red)
Audio L (white)
01US01COV-BR2.book Page 9 Friday, December 14, 2001 7:07 PM