Sony kv-30xbr910 Manual
27
SETU
P
Set
up
S
E
TU
P
P
SETU
P
S
E
TU
P
P
SETU
P
Notes on Using This Connection
To Do This ...
Do This ...
Watch cable (unscrambled)
channels
channels
Press
TV/VIDEO
repeatedly to select the cable input (UHF/VHF in the
illustration).
Watch cable box (scrambled)
channels
channels
Turn on the VCR and tune it to the channel the cable box is set to (usually
channel 3 or 4). Press
channel 3 or 4). Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1
in the illustration). Use the cable box to change channels.
Watch the VCR
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control
to operate the cable box or
VCR
to operate the cable box or
VCR
If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 47-48.
“Programming the Remote Control” on pages 47-48.
Activate the remote control to
operate the cable box or VCR
operate the cable box or VCR
For the cable box, press
SAT/CABLE FUNCTION
. For the VCR, open the outside
cover, as shown on page 46. Then set the A/V slide switch to the position
you programmed for the VCR.
you programmed for the VCR.
Control specific cable box and
VCR functions with the TV
remote control
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page 90.
CATV
Coaxial
cable
A/V cable
cable
Splitter
(not supplied)
Coaxial
cable
TV
Cable box
VCR
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
white to white, etc.
If you are connecting a
digital cable box, you will
need a special
bi-directional splitter
designed to work with
your cable box.
34XBR.book Page 27 Monday, May 19, 2003 8:44 AM