Sound Storm sd750ts User Guide
FM1
106.30
MHz
ST
DX
TA
CH
6
LUD
SWF
POP
11:08
DISC
4
5
6
2
3
1
MOD
BND
Radio Operation
Automatic Memory Storing &
Program Scanning
Program Scanning
Automatic Preset Setup
20
Touch the LOC section on the
touch screen (or press LO/DX
button on the remote) to select
the LOCAL or DX mode .
touch screen (or press LO/DX
button on the remote) to select
the LOCAL or DX mode .
To tune in strong-singnal FM
Station only (LO/DX function)
Station only (LO/DX function)
(
)
You can choose between the LOCAL
and DX(DISTANCE) mode for local or
long-distance traffic news .
Storing Stations In Memory
Setting Memory
Press the
/CH 1-6 button repeatedly
on the front panel to preset stations at
radio mode .
radio mode .
Or touch the screen the
1-6 sections
(
)
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
-Store in Memory
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
-Store in Memory
Touch and keep the 1-6 sections
(or press and hold the
(or press and hold the
/CH 1-6) for
about 2 seconds, the current listening
station will be stored into the
number location
station will be stored into the
number location
.
-Retrieve a preset station
Touch the 1-6 sections briefly (or press
the
/CH1-6 button repeatedly) to
retrieve a station which had been
stored in the memory in advance the
chose number is shown on display .
stored in the memory in advance the
chose number is shown on display .
RDS FUNCTION
TA Traffic Annonuncement
(priority For Traffic Information)
In Radio mode, touch the TA
section briefly (or swing the SEL
knob briefly in the TA/AF direction) ,
to activate the TA function. Touch it
section briefly (or swing the SEL
knob briefly in the TA/AF direction) ,
to activate the TA function. Touch it
again to turn off the TA function .When
the TA function is activated, the TA
symbol appears in the display .
the TA function is activated, the TA
symbol appears in the display .
In Radio mode, touch it to select
the desired item, it will display the
the desired item, it will display the
following as below :
In Radio Mode, Touch and keep the
APS section on the touch screen
(or swing and hold the SEL knob in
direction of the APS/DISP) for about
direction of the APS/DISP) for about
2 seconds to active automatic station
storage. The radio searches within the
current frequency band, e.g. FM1, for
the stronger signal level until the search
cycle has finished . The six strongest
stations are then allocated to the
corresponding storage locations . Then
the station of the first storage location
is set .
storage. The radio searches within the
current frequency band, e.g. FM1, for
the stronger signal level until the search
cycle has finished . The six strongest
stations are then allocated to the
corresponding storage locations . Then
the station of the first storage location
is set .
Scan Function
In Radio mode, briefly touch the
APS section on the touch screen
(or swing the SEL knob briefly in
the APS/DISP direction) , the radio
the APS/DISP direction) , the radio
briefly plays all the preset stations of the
frequency band .
frequency band .
TA
LOC
APS
APS
Touch to preset station
FM1
106.30
MHz
ST
DX
TA
CH
6
LUD
SWF
POP
11:08
DISC
TA
AF
PTY
DSP
CLK
SWF
LUD