Soundstream 1000d User Manual

TROUBLE SHOOTING

NO SOUND

Is the LED lit? 

Check Power and Remote turn-on

wire for voltage. Make sure Ground

wire is secure.

 

STILL NO SOUND

See your Authorize Sound Stream Dealer.

SOUND IN ONE CHANNEL ONLY

Reverse left and right speakers by unplugging the speaker connector. turning

it over and plugging it back in.

SOUND IS NOW IN

SOUND IS NOW IN

Reverse RCA inputs

Problem is in the speaker of

speaker wire of the silent channel

SOUND IS NOW IN

Reverse RCAs at head unit

Problem is in the Amplifier, See your

local Authorized Dealer

Problem is in the head unit

or before the amplifier

Problem is in the RCA cables

RPOTECTION CIRCUIT

Short Circuit Protection engaged: The amplifier will turn off and try to come back on

immediately. The amplifier will cycle like this indefinitely, with  “blips” of sound each time

If this is the case, check your speakers and wiring for low impedance and short circuits.

Thermal Protection engaged: The amplifier will turn off and several minutes later will come

back on. In this case, ensure that there is nothing blocking the normal convective airflow of

the amplifier. No obstruction n should be within 2.4” of the amplifier on all sides.

14