Spectralink jpi300 Brochure
Technical Bulletin CS-02-03
Hardware Changes to Support the NEC NEAX 2000 IVS
2
Date:
April 02, 2002
Software Versions:
All
Hardware Revisions:
TGU116, TGH116, CPU316,
CPH316, SCU516/508,
SCH516/508
CPH316, SCU516/508,
SCH516/508
Product Type:
All Systems
Access Level:
General
Originator:
Matt Jerger
Approvers:
John Elms
Status:
Approved
Revision:
A
Description
The LinkPlus digital interface is now available for the NEC NEAX 2000 IVS
2
. New
SpectraLink hardware is required to support this PBX interface. All new hardware will
be labeled with an identifier of Gen II. All Gen II products will be compatible with
previous products.
be labeled with an identifier of Gen II. All Gen II products will be compatible with
previous products.
Link 3000:
For the Link 3000, you must use either the new CPU316 or CPH316 Interface Modules.
The label on the front panel of the card will indicate Gen II (see Figure 1).
The label on the front panel of the card will indicate Gen II (see Figure 1).
Figure 1
Link 150 M3:
For the Link 150 M3 system, you must use either the new SCU516/508 or SCH516/508
Master Control Units. The product label on the bottom side of the MCU will indicate
Gen II (see Figure 2).
Master Control Units. The product label on the bottom side of the MCU will indicate
Gen II (see Figure 2).
THE INFORMATION PROVIDED IN THE SPECTRALINK TECHNICAL BULLETIN IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. NO
OBLIGATION OR LIABILITY WILL ARISE OUT OF, SPECTRALINK RENDERING TECHNICAL OR OTHER ADVICE OR SERVICE IN CONNECTION
HEREWITH.
SpectraLink Corporation • 5755 Central Avenue • Boulder, Colorado 80301 • 303.440.5330 • Fax 303.440.5331