Syswan sw24 User Manual
Syswan Duolinks SW24 Series
Page 8
User Guide
© Syswan Technologies, Inc.
WAN
LINK/ACT
10M/100M
ON – Physical connection to the Broadband modem on WAN port 1/2 established.
OFF – No physical connection on WAN port 1/2.
ON – Physical connection using 100BaseT on WAN port 1/2 established.
OFF – 10BaseT connection or no connection on WAN port 1/2.
System
Power
Status
OFF – No power.
ON – Normal Operation
OFF – Normal operation.
ON – Firmware not loaded or Hardware error.
Blinking – Data in/out
Some Status and Error conditions are indicated by combinations of LEDs, as shown below
LED Action
Condition
WAN1 LINK/ACT & 10M/100M LEDs flash alternatively.
Firmware Download in progress.
WAN1 LINK/ACT & 10M/100M LEDs flash concurrently.
MAC address not assigned.
WAN1 LINK/ACT & 10M/100M LEDs solid On.
SDRAM error.
WAN2 LINK/ACT & 10M/100M LEDs solid On.
Timer/Interrupt error.
LAN1 LINK/ACT & 10M/100M LEDs solid On.
LAN/WAN error.
If your discover any of the above error conditions, please contact our support team for assistance.