Syswan sw24 User Manual
Syswan Duolinks SW24 Series
Page 84
User Guide
© Syswan Technologies, Inc.
SNMP
SNMP (Simple Network Management Protocol) is used in network management to monitor network devices
for conditions that may requirer attention.
for conditions that may requirer attention.
This section is only useful if you have installed a SNMP (Simple Network Management Protocol) software on
your PC. If so, you may use a standard MIB II file with your Duolinks SW24 Series Load Balancer to monitor
network and device activity.
your PC. If so, you may use a standard MIB II file with your Duolinks SW24 Series Load Balancer to monitor
network and device activity.
SNMP Configuration Page
Settings – SNMP
System
Information
Information
This is the system information which will identify this device.
Community
A relationship between a SNMP agent and a set of SNMP managers that defines
authentication, access control and proxy characteristics.
authentication, access control and proxy characteristics.
Trap Targets
Up to three IP addresses can be entered. SNMP Trap information will be sent to these
target addresses.
target addresses.