Syswan sw88 User Manual
Syswan Octolinks SW88 Series
Page 64
User Guide
© Syswan Technologies, Inc.
Settings – Bandwidth Policy
WAN Inbound /
Outbound
Policy
Outbound
Policy
• Policy Name – The name of a policy which is used to classify the received packets
based on the following types for your memory
• Local / Remote Address, Port – Specify a packet based on Local/Remote address
or port. Address has two types: IP address and MAC address. By default, the IP
address is 0.0.0.0 for all IP Addresses but the MAC address needs to be specified.
Port and Protocol Type define all packets for special applications.
address is 0.0.0.0 for all IP Addresses but the MAC address needs to be specified.
Port and Protocol Type define all packets for special applications.
• Protocol Type – The field defines traffic packet type, i.e. IP, TCP and UDP.
• Maximum / Guaranteed Bandwidth –This device supports Bandwidth queues.
• Maximum / Guaranteed Bandwidth –This device supports Bandwidth queues.
When a packet meets a policy rule requirement, it will be put into the corresponding
queue. The queue will send them using the guaranteed bandwidth. If the rest of the
bandwidth is enough, it will try to reach the maximum allocated bandwidth.
queue. The queue will send them using the guaranteed bandwidth. If the rest of the
bandwidth is enough, it will try to reach the maximum allocated bandwidth.