jWIN jd-vd703 User Manual
En 22
OUTPUT Setting [DVD]
This portable DVD player provides two types of audio output to set and that include 2-channel stereo sound and digital
sound output.
sound output.
1
Press
SETUP in stop mode.
2
Press / to select “AUDIO SETUP” and press
PLAY/SEL.
3
Press / to select “OUTPUT” and press
PLAY/SEL.
4
Press / to select a preferred output setting.
5
Press
PLAY/SEL.
NOTE:
The digital output connectors are used to output the digital audio signal recorded on discs. You can output the digital signal via
ether coaxial output jack to an amplifier. If you set Audio Output to <Digital> from on-screen display, the sound will be output as
the original sound recording format on discs (for example; Dolby Digital).
the original sound recording format on discs (for example; Dolby Digital).
WARNING:
Do not set ”AUDIO SETUP” to “Digital” via the on-screen display unless you are connecting (via the DOLBY DIGITAL AUDIO OUT jack)
an A/V decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the
speakers.
speakers.
To return the screen to the SETUP MENU
Select “RETURN” and then press
PLAY/SEL.
To finish the setup operation
Press
SETUP to exit or select EXIT from SETUP MENU screen.
3-4
Audio Setup
Chapter 3