Tyco 1529L User Manual

Specifications
Sensor

SecuGen FOR

Image Capture Speed

600ms/frame

Image Transfer Speed

500Byte/ms

Pixel Resolution

356x292

USB Signaling Type

Full Speed Type

Theory of Operation
The USB host initiates communication with the FDU01 using operation commands
(Sensor LED On, Fingerprint Capture Start and Stop). Fingerprint data are then cap-
tured by the CMOS sensor at a total image size of 356 x 292 with 8-bit gray level. The
image frame transfer speed is 500 bytes/ms. It takes about 600 milliseconds to send one
frame of image data over USB protocols. FDU01 uses the SecuGen FOR (Fingerprint
Optic Reader).

Sensor

CMOS Image Sensor

Resolution

500dpi

Verifying Time

<1sec

Image Capture Error Rate

<0.1%

Life Time Typically

40,000Hrs

There is a USB credit card reader only. The USB version is available in HID and Key-
board emulation versions. The reader reads all three stripes on a standard credit card or
drivers license.

Reference Standards-Conform to

International Standards Organization, American National Standards

applicable standards

Institute, California Drivers License, American Association of Motor

Vehicle Administrators

Message Format

ACCII

Card Speed

3 to 50 IPS

MTBF Electronics

125,000 hrs; Head 1,000,000 passes

Omni-directional scanner:
1. Ability to read 1D codes with a 360º rotation, eliminating the need to orient the

scanner in the field of view

2. Scan angle

Minimum horizontal: 34º ± 1.5º
Minimum vertical: 12.5º ± 1.5º

3. Ability to read 2-D barcodes (PDF417, Micro PDF)
4. Ability to read damaged or poorly printed barcodes

1-4