Fujifilm Superia 200 135/24 15696024 User Manual
Product codes
15696024
3
FUJICOLOR SUPERIA 200
¥
FUJIFILM DATA SHEET
11.
FILM STRUCTURE
7.
FILM HANDLING
¥
Expose film before the expiration date indicated
on the film package and process promptly after ex-
posure.
on the film package and process promptly after ex-
posure.
¥
When loading and unloading roll film, avoid direct
sunlight. If there is no shade, turning one's back
toward the sun will shade the film.
sunlight. If there is no shade, turning one's back
toward the sun will shade the film.
¥
Camera-loaded film should be exposed and pro-
cessed immediately.
cessed immediately.
¥
X-ray equipment, used to inspect carry-on bag-
gage at airport terminals, can cause film fogging.
Repeated inspections increase this possibility, so
both exposed and unexposed films should be re-
moved for manual inspection.
gage at airport terminals, can cause film fogging.
Repeated inspections increase this possibility, so
both exposed and unexposed films should be re-
moved for manual inspection.
¥
Film fogging may occur near X-ray equipment
used in hospitals, factories, laboratories and other
locations. Always keep film away from possible
sources of radiation.
used in hospitals, factories, laboratories and other
locations. Always keep film away from possible
sources of radiation.
8.
FILM STORAGE
Unprocessed Film
¥
Storing exposed or unexposed film under high
temperature and humidity conditions will cause
adverse speed, color balance and physical prop-
erty changes. Store film under the following con-
ditions.
temperature and humidity conditions will cause
adverse speed, color balance and physical prop-
erty changes. Store film under the following con-
ditions.
¼ Ordinary Storage: Protect from heat.
¼ Long-term Storage: Below 0°C (32°F)
¥
Building materials, finishes used on newly-manu-
factured furniture and bonding agents may pro-
duce gases which affect photographic film. Do
not store film, lightproof boxes of film, loaded
factured furniture and bonding agents may pro-
duce gases which affect photographic film. Do
not store film, lightproof boxes of film, loaded
cameras or film holders under these conditions.
¥
Before use, allow films to stand at room-tempera-
ture over 1 hour. Opening the package/box while
film is cold may cause harmful condensation.
ture over 1 hour. Opening the package/box while
film is cold may cause harmful condensation.
Processed Film
Exposure to light, high temperature and humidity can
cause color changes in processed films. Therefore,
place such films in sleeves and store in dark, dry, cool
and well ventilated locations under the following con-
ditions.
cause color changes in processed films. Therefore,
place such films in sleeves and store in dark, dry, cool
and well ventilated locations under the following con-
ditions.
¼ General Storage:
25°C (77°F) at 30 to 60% RH
¼ Long-term Storage:
10°C (50°F) at 30 to 50% RH
NOTE
As with all color dyes, those used in this film will
discolor or fade with time.
discolor or fade with time.
9.
PROCESSING
This film is intended for processing in Fujifilm Pro-
cesses CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S or
Kodak Process C-41.
cesses CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S or
Kodak Process C-41.
10.
JUDGING EXPOSURE RESULT
SUPERIA 200 exposure result can be accurately pre-
dicted by using an electronic densitometer equipped
with Status M filters. An 18% gray card, receiving the
same illumination as the subject, when read through
the RED filter should render density readings between
0.97 and 1.16 (for exposures under recommended
lighting and with optimal film processing).
dicted by using an electronic densitometer equipped
with Status M filters. An 18% gray card, receiving the
same illumination as the subject, when read through
the RED filter should render density readings between
0.97 and 1.16 (for exposures under recommended
lighting and with optimal film processing).