Eaton 010-0029 Catalog
eaton corporation Enclosure Power Distribution Units
24
Rack Power Module
The Rack Power Module (RPM) delivers up to 36 kW (hard wire option required, BladeUPS connector limits to 12kW) of power to loads
of various voltages, power cords and layouts. The 3U RPM can be deployed in the same rack with the UPS and IT equipment; there’s no
need for a dedicated infrastructure rack. The resulting architecture has fewer cables to manage, fewer distribution points to monitor and
greater flexibility for IT personnel to make changes without an electrician. This unit is typically deployed with the Eaton BladeUPS units.
of various voltages, power cords and layouts. The 3U RPM can be deployed in the same rack with the UPS and IT equipment; there’s no
need for a dedicated infrastructure rack. The resulting architecture has fewer cables to manage, fewer distribution points to monitor and
greater flexibility for IT personnel to make changes without an electrician. This unit is typically deployed with the Eaton BladeUPS units.
Features:
• Provides plug-and-play primary distribution of power from a three-phase input source to
secondary power distribution devices
• Serves data center loads with various voltages, power cord configurations and layouts
• Distributes three-phase power to 12 poles, grouped into two sets of six poles, with choice of
• Distributes three-phase power to 12 poles, grouped into two sets of six poles, with choice of
output receptacle types
• “Power Equalizer” LED display gives quick visual indication of each circuit’s load, reducing
possibility of overloads and breakers tripped off line
• Load information available from the front of the rack, no need to check individual power strips
in the rear of the cabinet (hot isle)
• Branch circuit monitoring option allows easy load monitoring over the network
• Installs in only 3U of space in EIA 19” rack or enclosure (or wall mounted), all hardware included
• Enables customer installation and changes without the services of a licensed electrician
• Installs in only 3U of space in EIA 19” rack or enclosure (or wall mounted), all hardware included
• Enables customer installation and changes without the services of a licensed electrician
Rack P
ow
er Module
Metering Choices
1 = Power Equalizer
2 = Energy Management System, NO Card
3 = Energy Management System, with card
Rack Power Module (RPM) part number guide
(Base 3U RPM distribution box)
0
0
0
0
0
Output Receptacle Plate #1 & #2
1 = L21-20R
2 = L21-30R
3 = L6-15R
4 = L6-20R
5 = L6-30R
6 = 5-15R
7 = 5-20R
8 = L14-20R
9 = L14-30R
A = IEC320-C13 (208V)
B = IEC320-C19 (208V)
C = IEC320-C13 (230V) International
D = IEC320-C19 (230V) International
E = L15-20
F = L15-30
Y 0 3
Input Cords/Connection
0 = Hardwire
1 = BladeUPS Connector 208V
2 = IEC309-60 5 wire
3 = NEMA L21-30P
4 = BladeUPS Connector 400V
Input Voltage
1 = 208V
2 = 400V
Input Cords Length
0 = Hardwire
1 = 6 feet
2 = 10 feet
3 = 15 feet
4 = 20 feet
0