JDSU TestifierPRO TP655 TP655 Leaflet
Product codes
TP655
TestifierPRO™
Cable Tester
Key Features
• Identifies cable termination on active ports by blinking
port LED
• Measures cable length using patented cable capacitance
method
• Displays single-ended test results in wiremap format
for opens, shorts, and split pairs
• Tests and displays in wiremap format shorts, opens,
miswires, reversals, and split pairs with remotes
• Two-line, 16-character, back-lit, full alphanumeric LCD
with icon flags
• Auto-off and timed backlight in any mode for low power
consumption and long battery life
The TestifierPRO
TM
Cable Tester provides telecom, datacom, and cable installers
and technicians with cable test, length measurement, and hub blink functions in
one unit. The easy-to-use TestifierPRO cable tester requires one-button operation
to initiate telco, network, and coax modes for diagnostic tests and results. The
main unit includes built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire
twisted pair and F-connector for testing coax. An integrated remote bay houses a
detachable test remote with built-in jacks for testing twisted pair cable terminated
with RJ11 or RJ45 connectors.
one unit. The easy-to-use TestifierPRO cable tester requires one-button operation
to initiate telco, network, and coax modes for diagnostic tests and results. The
main unit includes built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire
twisted pair and F-connector for testing coax. An integrated remote bay houses a
detachable test remote with built-in jacks for testing twisted pair cable terminated
with RJ11 or RJ45 connectors.
The field-proven TestifierPRO performs detailed analysis to detect miswire, no
connection, short, high-resistance fault, and split pair conditions when used with
remote identifiers. It also tests and reports on shorts, opens, and split pairs
conducted without a remote. The MAP ID function identifies multiple cables by
displaying ID numbers of map-only remotes. TestifierPRO cable tester measures
cable length and displays PASS icon for correctly wired T568A/B and six-pin
cable. Tone generator mode sends any of four user-selectable tones on all pin and
pair combinations.
connection, short, high-resistance fault, and split pair conditions when used with
remote identifiers. It also tests and reports on shorts, opens, and split pairs
conducted without a remote. The MAP ID function identifies multiple cables by
displaying ID numbers of map-only remotes. TestifierPRO cable tester measures
cable length and displays PASS icon for correctly wired T568A/B and six-pin
cable. Tone generator mode sends any of four user-selectable tones on all pin and
pair combinations.
Applications
• Installation, troubleshooting,
and maintenance on telco,
network, or coax cable
network, or coax cable
• Identify switch port LED where
network cable is terminated
• Measure cable length
• Determine wiring condition
• Identify up to 20 telco, network,
• Determine wiring condition
• Identify up to 20 telco, network,
or coax cable runs at a time
• Find and fix position of exposed
or hidden cable
WEBSITE
:
www.jdsu.com/know
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS