LG BB5530A User Guide

15

C

onnecting

Yellow-green

The wireless subwoofer is 
receiving the signal of the unit.

Yellow-green 
(blink)

The wireless subwoofer is trying 
to connect.

Red

The Wireless subwoofer is in 
standby mode.

Off (No 
display)

The power cord of wireless 
subwoofer is disconnected.

1.  Connect the power cord of the Wireless 

subwoofer to the outlet.

2.  Turn on the main unit : The main unit and 

wireless subwoofer will be automatically 
connected. 

When your connection is not completed, you can 
see the red LED on the woofer and woofer is not 
made sound. To solve the problem, follow the 
below steps.
1.  Press and hold Z STOP button on the unit 

and MUTE button on the remote control 
simultaneously. 
- Displays the “REMATE”.

2.   Press PAIRING on back of the woofer. 

- The Yellow-green LED will flicker.

3.   Turn off and on the unit. 

- If you see “Yellow-green” LED, it’ s successful.

4.   If you don’t see “Yellow-green” LED, try again 

Step 1 - Step 3.

 

y If there is a strong electromagnetic wave 

product nearby, interference may occur. Put 
the unit (Wireless subwoofer and main unit) 
away from there.

 

y If you operate main unit then wireless 

subwoofer (rear speakers) sound within a 
few seconds in standby mode.

 

y Set the distance between this unit and 

subwoofer Receiver within 10 m (32 ft.).

 

y Optimum performance can be 

implemented only when the unit and 
the Wireless subwoofer within distance 
of 2 m (6 ft.) to 10 m (32 ft.) is used since 
communication failure may occur if longer 
distance is used.

 

y It takes a few seconds (and may take longer) 

for the Wireless Transmitter and subwoofer 
to communicate with each other.

 

,