LG BB5530A User Guide

22

C

onnecting

If there is a DHCP server on the local area network 
(LAN) via wired connection, this player will 
automatically be allocated an IP address. After 
making the physical connection, a small number of 
home networks may require the player’s network 
setting to be adjusted. Adjust the [NETWORK] 
setting as follow.

Preparation
Before setting the wired network, you need to 
connect the broadband internet to your home 
network.

1.  Select [Connection Setting] option in the 

[Settings] menu then press ENTER (b). 

2.  Read the preparations for the network settings 

and then press ENTER (b) while [Start] is 

highlighted.

Network will automatically be connected to the 
unit.

If you want to set the network settings manually, 
use W/S to select [Advanced Setting] on the 

[Network Setting] menu and press ENTER (b).
1.  Use W/S to select [Wired] and press ENTER 

(b).

2. Use W/S/A/D to select the IP mode 

between [Dynamic] and [Static]. 
Normally, select [Dynamic] to allocate an IP 
address automatically.

If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using W/S/

A/D and numerical buttons. If you make a 

mistake while entering a number, press CLEAR 
to clear the highlighted part.

 

,

3.  Select [Next] and press ENTER (b) to apply 

network settings.

Network connection status is displayed on the 
screen.

4.  Press ENTER (b) while [OK] is highlighted to 

finish the wired network settings.