Eaton IPC3400-AB-NET User Manual

© 2008 Eaton Corporation. All Rights Reserved. All specifications are subject to change without notice.

• Height 3.43” x Depth 7.5” x Width 5.63”    
• Approximate shipping weight is 6 lbs.

• IPC3400-A1 has 4 NEMA outlets
• IPC3400-AB has 4 IEC outlets

• (1) Main power 
• (1) Data light
• (4) Power on to outlets 1-4

• RS232, Serial: 9600 baud only
• Optional ethernet control via RJ45  

 

connector (add -NET to part number)

• Data terminal emulation software is required 

to communicate with the IPC internal
command codes such a Telnet or  

 

Hyperterminal

• External Modem must be put in auto-answer 

mode prior to making contact with the IPC

• Common Mode - Line to Ground
• Differential Mode - Line to Line

• L-N, L-G, N-G

• IEC C14 power inlet 
• Power cable included: 

-AB version has 8’ C13 to C14
-A1 version has 9’ C13 to 5-15P

• Query the IPC for Outlet and Watchdog   

status, i.e. outlets are “on” or “off”

• Turn outlets “on” or “off” at one time
• Sequence power up and power down to   

outlets 1 - 4 with a four second time delay 
(factory set)

• Set power “on” sequence to any combination 

of outlets

• Set the MTD

TM

 timing from 1 second to 

999 seconds, i.e. 009 = 9 seconds

• For added security, a password feature    

is included which allows the user to assign 
a three alphanumeric character password

• The IPC comes with a default address    

but you can also create your own with    
any four alphanumeric characters

• The IPC will monitor the control connection 

and automatically reboot itself if the 
connection locks up. The auto-reboot is   
activated by the time-out period running 
down to zero. When this occurs the IPC will
shut down all outlets for four seconds and 
restart in the default or user defined sequence

• Set the Time Out Period to any number 0-9

where each digit represents 30 seconds, 
i.e. 3 = 120 seconds (user defined)

• All outlets on/off
• Individual outlet on/off
• Set up and Sequence on/off all outlets
• Create password and unit address
• Name outlets with 8 character name
• Set up, enable or disable Watchdog
• Display outlet and Watchdog Timer status