JDSU NT700 Leaflet
LanScaper™
Cabling and Network Tester
Key Features
• Detects and reports speed and capabilities for active
Ethernet and other devices up to 100 Mb/s
• Pinging function verifies connectivity to network devices
• Blinks link indicator to identify cable termination on
active ports
• Identifies hubs, NICs or auto MDI/MDI-x devices
• Tests cabling configuration and verifies connectivity while
conducting tests for opens, shorts, miswires, split pairs,
and reverses
and reverses
• Displays length measurement for each pair in feet or
meters
• Generates selectable tones on selected pins for use with
tone tracers
e LanScaper™ is a jack identifier, cable tester, length measurement device, and
ping tester in one unit.
ping tester in one unit.
e easy-to-use LanScaper enables quick identification at unknown RJ45 jacks for
active Ethernet, POTS, Token Ring, or other devices. It pings network devices to
verify connections and IP addresses, automatically accessing DHCP hosts to ob-
tain network information. e LanScaper can quickly identify hubs, NICs, or auto
MDI/MDI-X devices and conduct link tests to identify speed and capabilities of
network drops.
active Ethernet, POTS, Token Ring, or other devices. It pings network devices to
verify connections and IP addresses, automatically accessing DHCP hosts to ob-
tain network information. e LanScaper can quickly identify hubs, NICs, or auto
MDI/MDI-X devices and conduct link tests to identify speed and capabilities of
network drops.
For cable testing, the LanScaper provides full cabling testing, displaying wire map,
ID, and faults, including shorts, opens, miswires, split pairs, and reverses. e full-
featured LanScaper also measures cable length and generates tone levels for signal
tracing and cable identification on all pairs, a selected pair, or a selected pin.
ID, and faults, including shorts, opens, miswires, split pairs, and reverses. e full-
featured LanScaper also measures cable length and generates tone levels for signal
tracing and cable identification on all pairs, a selected pair, or a selected pin.
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
Applications
• Network testing for port discovery,
ping test, and hub flash
• Identifies speeds up to 100 Mb/s,
duplex mode, and other capabilities
of active Ethernet devices
of active Ethernet devices
• Conducts full cable tests with
display of PASS, wiremap, ID, and
faults for telco, data, and coax cable
faults for telco, data, and coax cable
• Measures cable length
• Tones and traces cables
• Wiremaps network connections
• Tones and traces cables
• Wiremaps network connections
with remote identifiers
WEBSITE
:
www.jdsu.com/know