LG HBS-730 User Manual

6

ENG

- When there is an incoming call, the headset will ring.

- Briefly press the CALL button.

-  While on a call on your handset, press and hold VOLUME UP button for 3 seconds 

to transfer the audio either from headset to handset or from handset to headset.

-  Briefly press the CALL button to activate “Voice Command”. 

Note: If the handset does not support Voice Dialing, it is possible that performing 

this action will activate Last Number Redial.

-  Press and hold the CALL button for 1second to activate “Last Number Redial”. 

The headset will beep, and call the last number dialed.

-  Answer a second call without hanging up the first call by pressing the CALL button 

for 1 second (you will hear a beep). Press the CALL button for 1second to turn to 

the original call.

-  Briefly press the CALL button to terminate the active call or both calls at once. 

(subject to handset’s support)

-  Press the CALL button for 1second when the handset rings.

-  Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for 1 

second to mute/unmute the Mic during conversation.

-  You can use HBS-600 as a wired headphone. No 

charged battery is required and you can enjoy the 

audio quality of wired headphone.

-  Simply connect straight type(3-pole) plug of the 

included AUX cable to the bottom of the earcup 

and angle type (4-pole) plug to AV equipment (i.e., 

handset, MP3 player or headphone jack on air 

plane seats, etc.). 

-  Inserting an audio cable disables wireless 

functionality. (HBS-600 will be powered off)