LG BB4330A User Guide

32

S

ys

tem Se

tting

This player can stay in standby mode with low 
power consumption, so that the player can 
instantly boot without delay when you turn on this 
unit. Set this option to [On] for activating [Quick 
Start] function.

 

y [Quick Start] function may not be available 

at the moment. This function will become 
available through at software update.

 

y If [Quick Start] option is set to [On] and an 

AC power is accidently re-connected to 
the player by power failure etc., the player 
automatically boots itself to be the standby 
status. Before operating the player, wait for a 
while until the player is in standby status. 

 

y When [Quick Start] is set to [On], power 

consumption will be higher than when 
[Quick Start] is set to [Off ].

 

,

The screen saver appears when you leave the 
player in Stop mode for about 5 minutes. If you 
set this option to [On], the unit automatically 
turns off within 20 minutes since the Screen Saver 
is displayed. Set this option to [Off ] to leave the 
screen saver until the unit is operated by the user.

When you set [Auto Power Off ] function in 
setting menu on, this unit will be off itself to 
save electronic consumption in the case main 
unit is not connected to external device and is 
not used for 25 minutes.
So does this unit after six hours since Main unit 
has been connected to other device using 
analog input.

 

,

You can listen to TV sound through this unit’s 
speaker automatically when TV is turned on. TV and 
this unit should be connected with optical cable.

Press W to move and press A/D to select [On] or 

[Off ]. Select [OK] and press ENTER (b).

[Factory Set]
You can reset the player to its original factory 
settings.

[Blu-ray Storage Clear]
Initializes the BD-Live content from the 
connected USB storage.

If you reset the player to its original factory 
settings using [Factory Set] option, you have to 
set all the activation for the online services and 
network settings again.

 

,