Draper WRT/R 121062 Product Datasheet

 

 

Up, Down and Stop control of an LVC-III or MC1 via RF (radio frequency).

 

 

The WRT/R can be used with either the LVC-III, or the MC1 with a splitter and a 

 

 

power supply. Other controls may be connected to the LVC-III or MC1 simultaneously:

 

 

a.  LVC-S low voltage wall switch (or Auxiliary control systems employing “dry” 

  

 

contacts).

 

 

b.  IRT/R infrared remote control package (with splitter). 

 

 

c.  LVC-SL LED low voltage wall switch (with splitter).

 

 

The transmitter part of this package, the WRT, is a dual RF/IR transmitter, and is 

 

 

available as a replacement part.

 

 

The receiver part of this package can learn up to five remotes.

 

 

None. This package merely consists of the transmitter and receiver. The contacts are 

 

 

part of the LVC-III or MC1.

 

 

Operates on a frequency of 433 Mhz. Transmitter operates on two AAA batteries.

 

 

The WRT/R is a package consisting of a receiver and hand-held transmitter which

 

 

control an LVC-III or MC1 via radio frequency. Its range with fresh batteries is approx. 

 

 

75'. The transmitter is approx. 2

3

/

8

" wide, 5¾" long, and ½" thick. Operates on two 

 

 

AAA batteries (included). The receiver is approx. 3

7

/

8

" x 2

1

/

8

" x 1", with an antenna 

 

 

approx. 1¾" long, and a 10' long, 4-conductor modular cable, which plugs into a 

 

 

standard RJ-11 plug on the LVC-III or MC1. Each receiver will learn up to five unique

  

transmitters.

 

 

121062—WRT/R, Transmitter and Receiver

  

121063—WRT, 

Transmitter 

only

 

®

Copyright ©2009 Draper Inc. 

Form WRT/R_TechDataSheet09  Printer in U.S.A.

3

7

/

8

"

2

1

/

8

"

1

3

/

4

"

5

3

/

4

"

2

3

/

8

"

Ey

e

Ey

e

Main

Au

x

Splitter and power supply 
provided with MC1 WRT/R 
Kit; not required with LVC-III 
WRT/R kit.