JDSU Resi-Talker LB300 LB300 Leaflet
Product codes
LB300
© 2007 JDSU. All rights reserved.
www.jdsu.com/hbn
Resi-Tester
™
TP300
Overview
This identifier and
verification tester
is designed for all
home networking/
automation wiring
environments—
CATV, telephone systems, audio
cable, security/alarm wiring and
network cabling.
Key Features
• Displays the faults connected
with the various cable types
• Warns of voltage on lines
• Indicates Pass or Fail for each test
• Can trace installed wires to
identify the exact terminus
• Identifies individual outlets as
phone, cable, or data network
• Using the optional multi-identifier
sets, connections on up to 20 coax
outlets and 20 paired cables can
be wiremapped simultaneously
• Auto-off
• Unbreakable case
• Requires 9-volt battery
(not included)
Resi-Toner
™
TG400
Overview
A full-function
tone generator
that tests
connections on
telephone systems
and speaker installations.
Key Features
• “Powers-up” installed telephone
lines under actual load conditions
with a simulated dial tone to
check connectivity and proper
wiring configurations, without a
service connection
• 3 different tone sounds
• Tests continuity
• Generates a unique tone
sequence for testing speaker
installations by “popping”
speakers—will work with either
AC- or DC-coupled speaker types
• Requires 9 volt battery
(not included)
Resi-Tracer
™
TT300
Overview
A triple-function tone
tracer with speaker
phasing and
telephone line
monitoring
capabilities.
Key Features
• Traces CAT 5/6, telephone, coax
and audio cables
• Audible and visual tone location
indicators
• Speaker phasing with built-in
microphone pickup
• Can trace either unpowered or
active coax cable
• POTS testing with monitor mode
and off-hook listening mode
—Telco-type test set feature
• Built-in RJ11 jack allows direct
plug-in to telephone line
• Noise canceling mode eliminates
60 cycle interference
• Requires 9-volt battery
(not included)
Tone Generators, Tracers, and Testers
TP300 Includes:
Resi-Tester
™
• #1 replacement remote
TP309 • #1 coax remote identifier TP65
• 12” (30.48 cm) cable assembly, RJ45
to alligator clip set TP40 • 7.5” (19.05 cm)
cable assembly with no-fault RJ12
connectors for RJ11 or RJ45 jacks TP20
Order Number: TP300
VIAS Number: TP300
TG400 Includes:
Resi-Toner
™
with alligator clips molded
cord set • 7.5” (19.05 cm) cable assembly
with no-fault RJ12 connectors for RJ11
or RJ45 jacks TP20 • Cord set with
alligator clips TG10
Order Number: TG400
VIAS Number: TG400
TT300 Includes:
Resi-Tracer
™
• Round tip TT30
Order Number: TT300
VIAS Number: TT300