JDSU TP607 Leaflet
LanRoamerPRO™
Cable Tester
Key Features
• Measures cable length in feet or meters
• Two-line, 16-character alphanumeric LCD with icon flags
displays test results in wiremap format
• Conducts single-ended tests on shorts, splits, and opens
• Auto-on enables test results within 2 seconds
• Tests for shorts, opens, miswires, reversals, and split pairs
with remote
• Includes tone generator
The LanRoamerPRO™ is a length measurement tool, cable tester, and tone gen-
erator in one unit. The LCD, four momentary buttons, single end testing capa-
bility, and other features make the LanRoamerPRO an easy-to-use tool for
residential, datacom, telecom, and cable contractors and installers.
erator in one unit. The LCD, four momentary buttons, single end testing capa-
bility, and other features make the LanRoamerPRO an easy-to-use tool for
residential, datacom, telecom, and cable contractors and installers.
When testing with a remote identifier, the LanRoamerPRO remains off to extend
battery life. The auto-on feature enables display of wiremap, ID, and multiple
faults within 2 seconds. The tester automatically powers off within 5 seconds of
the cable being disconnected.
battery life. The auto-on feature enables display of wiremap, ID, and multiple
faults within 2 seconds. The tester automatically powers off within 5 seconds of
the cable being disconnected.
The LanRoamerPRO operates in one of four modes. In Test/Pre-test mode, the
unit detects and displays shorts, opens, miswires, reversals, and split pairs. If
there is no remote, it tests for shorts, splits, and opens. It also displays the PASS
icon for T568A/B passing cables. In Length mode, the unit measures length using
a proven cable capacitance method. Tone mode generates audio tones for use
with tone tracers on all pairs. Finally, Setup mode enables user-selectable options,
such as beep-on-PASS or setting length measurements for feet or meters.
unit detects and displays shorts, opens, miswires, reversals, and split pairs. If
there is no remote, it tests for shorts, splits, and opens. It also displays the PASS
icon for T568A/B passing cables. In Length mode, the unit measures length using
a proven cable capacitance method. Tone mode generates audio tones for use
with tone tracers on all pairs. Finally, Setup mode enables user-selectable options,
such as beep-on-PASS or setting length measurements for feet or meters.
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
Applications
• Installation and maintenance on
telco, datacom, and coax cable
• Generates wiremap, ID, multiple
faults, and PASS results
• Measures cable length
• Generates tone for tracing
• Supports unshielded or shielded
• Generates tone for tracing
• Supports unshielded or shielded
twisted pair and coax
WEBSITE
:
www.jdsu.com/know