Sparkle Technology SPA065VS21C R-SPA065VS21C User Manual
Product codes
R-SPA065VS21C
4
3.2. INRUSH CURRENT
(Cold start – 25 deg. C)
115V
No
damage
230V
No
damage
Maximum inrush current from power-on (with power on at any point on the AC sine) and
including, but not limited to, three line cycles, shall be limited to a level below the surge
rating of the input line cord, AC switch if present, bridge rectifier, fuse, and EMI filter
components. Repetitive ON/OFF cycling of the AC input voltage should not damage the
power supply or cause the input fuse to blow.
3.3. INPUT LINE CURRENT
115V
2.0Amps – rms maximum
230V
1.0Amps – rms maximum
3.4. EFFICIENCY
> 85% at the condition of full load and nominal voltage input.
3.5 MECHANICAL SPECIFICATIONS
The mechanical drawing of the subject power supply, which indicate the form factor, location of
the mounting holes, location, the length of the connectors, and other physical specifications of the
subject power supply. Please refer to the attachment drawing.
4.0. OUTPUT ELECTRICAL REQUIREMENTS
The power supply provide the function of universal and variable output voltage that controlled by
manual switch.
4.1 OUTPUT VOLTAGE AND CURRENT RATING
Output
MINIMUM
LOAD
MAXIMUM
LOAD
LOAD
REG
LINE
REG.
RIPPLE&NOISE
+15V 0A 4.0A
̈́5%
̈́1%
240mV P-P
+16V 0A 3.75A
̈́5%
̈́1%
240mV P-P
+18V 0A 3.6
A
̈́5%
̈́1%
240mV P-P
+19V 0A 3.42A
̈́5%
̈́1%
240mV P-P
+20V 0A 3.25A
̈́5%
̈́1%
240mV P-P
+21V 0A 3.09A
̈́5%
̈́1%
240mV P-P
Notes: Total output for this subject power supply is 65 watt
O/P Voltage by Manual Adjustment