LG BD270Y User Manual

Check List

Is the mains plug plugged in and switched on?
Is the TV switched on?
Try another channel, maybe a weak signal.
Check aerial is it plugged in? Check aerial, is the 
lead broken or damaged?
Have you tuned in a video channel on your 
TV to watch video on?
If you have used a SCART lead to connect your VCR
and TV have you selected the AV channel on your
TV? 
Check tuning, carry out Automatic Tuning again 

Are the TV channels tuned in properly?
Have you tried using another cassette?
Can you minimise the noise bars to an acceptable
level with 0, D or E ?

Can you get a picture on the TV?
Are the aerial leads and special RF connector lead
between your VCR and TV connected?
Are the TV channels tuned in properly?
Has the safety tab on the video cassette been
removed to prevent recording?
Try another station, maybe a weak signal
Check aerial is it plugged into TV?

Is the cassette compartment empty?
Are you trying to insert the cassette the right way
round?

Is the mains plug plugged in and switched on?
Is the VCR switched on
Check the batteries in remote control.

Is the video cassette damaged, have you tried 
using another one?
Adjust the horizontal control on your TV.
Check aerial is it plugged into VCR?
Check aerial, is the lead broken or damaged?
Check for local interference
Make sure that you are using a video TV 
channel on your TV.

Has the safety tab been removed from the video
cassette?

Whenever a video cassette is inserted into or ejected from your VCR the video head is

automatically cleaned. This should mean that additional head cleaning should not be necessary.

However dirt accumulating on the head after a long period of time can cause the playback

picture to become blurred or broken up. High quality video cassette tapes will not normally

deposit dirt onto the video head, but old or damaged tapes might.