LG NP7860W azul User Manual

Operating

Oper

ating

Pairing

To use the speaker, you must first pair it with your
mobile device.
1. Turn on the speaker. The speaker enters pairing

mode.

2. When the speaker enters pairing mode, LED light

blinks fast.

3. When searching for this speaker with the

Bluetooth device, a list of the devices found may

appear in the

Bluetooth device display depending

on the type of

Bluetooth device. The speaker

appears as “LG Sound 360 (xx)”.

4. Select “LG Sound 360 (xx)”.

y XX means the last two digits of

Bluetooth

address.

For example, if your speaker

has a

Bluetooth address such as

9C:02:98:4A:F7:

08, you will see “LG Sound

360 (

08)” on your

Bluetooth device.

y Depending on the

Bluetooth device type,

some devices have a different pairing way.
Enter the PIN code (0000) as needed.

Note

5. When the speaker is successfully connected to

your

Bluetooth device, the speaker beeps once

and the LED light changes to slow blink.

y When the speaker is turned on, it will

automatically try to reconnect to the last
device which has been paired with at least
once.

y If the speaker cannot connect to a previously

paired device in 20 minutes, it will be turned
off automatically.

Note

NFC

Bluetooth connection is available through NFC.
In order to use this feature, you need to activate NFC
on your mobile device. (The Read/Write item should
be checked on the NFC menu on your mobile device.)
1. Bring your mobile device close to the LG logo on

the top of the speaker.

2. In your mobile device, confirm the message from

the pop-up window to connect to the speaker.

3. When the speaker is successfully conncted to your

mobile device, the speaker will beep.

4. If you bring your mobile device close to the LG

logo(NFC) on the connected speaker again, the
connection will be disconnected.