Cavalry CAXH CAXH3701T0 User Manual

As you place the hard drive into the enclosure, watch the retainer 

pins on the right side of panel A. Once they have lined-up with 

the screw-holes on the side of your HDD, push the back end of 

the drive downwards, into the floor of Panel A. Do this slowly and 

firmly, making sure that all of the retainer pins on Panel A line up 

with the screw-holes  on the HDD.

EN-CAXH-B

Use your thumbs to push around the edge of the drive until you 

feel that the drive is well-mated with Panel A. Then, insert the two 

HDD screws into Panel A, and beyond until they meet with the 

screw-holes of the HDD. You may have to push the drive inwards, 

towards the board on Panel A, in order to line the holes up. Tighten 

the screws slowly, but make sure not to indent the plastic. 

Finger-tight will do.

Screwhole

Screwhole

Retainer Pins