Baracoda RS232 BDRS02 User Manual
Product codes
BDRS02
Serial Dongle User Guide
1 Introduction
This document is related to Baracoda Serial Dongle with the software version 1.2, which serial
numbers are 0212XXXX. The S/N of your product is located on the box or on the label located on the cover of
the adapter.
the adapter.
This document introduces a Bluetooth/RS-232 standalone device. It is able to connect to a wireless
barcode scanner without any software configuration. It can also replace a serial cable with minimum
configuration through its serial port. This adapter is intended to connect to a wide range of hosts equipped
with RS-232 port, enabling wireless serial communication without any changes in existing applications.
UART Settings, Frame format, Flow Control of the RS232 connector can be modified both by Bluetooth
(reading special configuration barcode with the Baracoda scanners) or by the RS232 port (through a
“configuration console”): please refer to the “Quick start up console guide” and to the “Serial Dongle
Programming guide” to have more information about these settings.
configuration through its serial port. This adapter is intended to connect to a wide range of hosts equipped
with RS-232 port, enabling wireless serial communication without any changes in existing applications.
UART Settings, Frame format, Flow Control of the RS232 connector can be modified both by Bluetooth
(reading special configuration barcode with the Baracoda scanners) or by the RS232 port (through a
“configuration console”): please refer to the “Quick start up console guide” and to the “Serial Dongle
Programming guide” to have more information about these settings.
2 Hardware description
Please notice in the figures below the on/off Switch, the Hard reset Button, the Dc connector and the “pairing”
barcode (you will find a second pairing barcode label in the box. Please just stick it where is the most
comfortable for you).
DC CONNECTOR
PAIRING BARCODE
RESET BUTTON
© Baracoda 2004
Page 2/9