Kingston Technology 1GB 533MHz DDR2 ECC Registered CL4 DIMM (Kit of 2) Single Rank, x4 KVR533D2S4R4K2/1G Data Sheet
Product codes
KVR533D2S4R4K2/1G
Memory Module Specification
Document No. VALUERAM0554-001.A00
06/18/07
DESCRIPTION:
ValueRAM's KVR533D2S4R4K2/1G is a kit of two 64M x 72-bit (512MB) DDR2-533 CL4
SDRAM (Synchronous DRAM) "single rank" registered ECC memory modules. Total kit
capacity is 1GB (1024MB). The components on each module include eighteen 64M x 4-bit
(16M x 4-bit x 4 Bank) DDR2-533 SDRAM in FBGA packages. Each 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:
SDRAM (Synchronous DRAM) "single rank" registered ECC memory modules. Total kit
capacity is 1GB (1024MB). The components on each module include eighteen 64M x 4-bit
(16M x 4-bit x 4 Bank) DDR2-533 SDRAM in FBGA packages. Each 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:
FEATURES:
Clock Cycle Time (tCK) CL=4
3.75ns (min.) / 8ns (max.)
Row Cycle Time (t
RC
)
60ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
105ns
Row Active Time (tRAS)
45ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
2.125 W (operating per module)
UL Rating
94 V - 0
Figure 1: KVR533D2S4R4K2/1G 240-Pin DIMM
KVR533D2S4R4K2/1G
1GB (512MB 64M x 72-Bit x 2 pcs.) DDR2-533
CL4 Registered 240-Pin ECC DIMM Kit
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
(Units = millimeters)