LG 49LS73B User Guide

39

Remote Control (SETTINGS)    Sound   Sound Test
Run a sound test to check that sound signals are outputted normally, then solve any problems by 

selecting the relevant option on the screen. If there are no problems with the Sound Test, check 

connected external devices.

Remote Control (SETTINGS)    Network   Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen 

keyboard. 

•

Connecting to a wired network:  connect the display to a Local Area Network (LAN) via the LAN 

port as shown in the following illustration and set up the network 

settings. Only wired network connections are supported. After 

making a physical connection, a small number of networks may 

require the display network settings to be adjusted. For most 

networks, the display will automatically make a connection without 

any adjustments. For detailed information, contact your Internet 

provider or consult your router manual.

Remote Control (SETTINGS)    Network   Wi-Fi Connection
If you have set the monitor up for a wireless network, you can check and connect to the available 

wireless Internet networks.

•

Add a Hidden Wireless Network:  If you input the name of network directly, you can add a wireless 

network.

•

Connect via WPS PBC: Connects easily when the button of a wireless AP supporting PBC is pressed.

•

Connect via WPS PIN:  Connects easily when the PIN of the wireless AP that you wish to connect to 

is entered in to the AP configuration webpage.

•

Advanced Settings:  If you input the information of network directly, you can enter a wireless network. 

If there is no wireless network available, click 

Advanced Settings. You can add 

a network.