LG 42WS50BS-B Owner's Manual

To use this function

- Must be displayed with various other products.

- Must be in a function that can be connected to RGB Cable by distributor and 

RS-232C.

Tile mode and choose Tile alignment and set the ID of the current product to 

set location.

* Only after pressing the SET button the adjustments made to the settings will 

be saved.

- Tile mode : column x  row ( c = 1 to 15   r = 1 to 15)

- 15 x 15 available.

- Configuration of an integration screen is also available as well as 

configuration of One by one Display.

Adjusts the screen position automatically.

The displayed image may be unstable for a few seconds while the configuration 

is in progress.

Moving the screen position horizontally and vertically.

Adjust the horizontal and 

vertical

 size of the screen taking into account the size 

of the bezel.

The image is omitted by the distance between the screens to be naturally 

shown.

Function to initialize and release a Tile.

All Tile setting are released when selecting Tile recall and the screen returns to 

Full screen.

 

y

If Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be 
disabled to provide the same picture quality as other displays.

Videos or photos stored on the USB device can be displayed on a single monitor by dividing them 

into the main and subscreens.

Option

Sets the type of secondary screen.

*OFF: Disables the secondary screen.

*PIP (Picture In Picture): Displays the secondary screen in the main screen.

*PBP (Picture By Picture): Displays the secondary screen next to the main 

screen.

Adjusts the position of the subscreen (top left, bottom left, top right, bottom 

right) The default value is inthe bottom right.

Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size: 

0) is 480x240; the maximum size (Size: 10) is 960x540.

 

y

The Position and Size options are enabled only in PIP mode.