IMC Networks McLIM, TP-TX/SSFX-SM1550-SC 855-12643 Leaflet

• Supports Ethernet, Fast Ethernet, and

Gigabit Ethernet, and up to OC-3 for

mode converters

• Available for multi-mode or single-mode

fiber with ST or SC fiber connectors

• Supports very long fiber distances

• Table-top or rackmountable

• 1-, 4-, 8- and 12-slot chassis

• 12-slot chassis is only 1U high

• AC power

• Modular, hot-swappable architecture

reduces operational costs associated

with product installation, upgrades and

maintenance

• LinkLoss and FiberAlert features assist

in diagnosing problems on fiber optic

networks

Your network is growing and many new access points, workstations,

etc.  are  required.    However,  legacy  equipment,  along  with  your

existing  wiring  infrastructure,  must  work  with  any  new  equipment

you implement in your network. When copper-to-fiber, copper-to-

coax or fiber-to-fiber conversions are required, along with advanced

troubleshooting  features,  our  MediaConverter  Series  is  the  perfect

solution.

IMC  Networks’  MediaConverter  Series  enables  you  to  easily  and

cost-effectively connect one type of media to other dissimilar media

or networking products. This series increases the functionality and

extends the productive life of both your legacy cabling infrastructure

and networking equipment when adding fiber to your network.

• 1, 4, 8 and 12-slot varieties

- One 10 Mbps twisted pair port with an RJ-45 connector

- One 10 Mbps fiber port with ST or SC connector(s)

- One 100 twisted pair port with an RJ-45 connector

- One 100 Mbps fiber port with ST or SC connector(s)

- One 10/100 twisted pair port with an RJ-45 connector

- One 100 Mbps fiber port with ST or SC connector(s)

- Plug-and-play operation

• McGigabit:

- One 1000 Mbps twisted pair port with an RJ-45 connector

- One 1000 Mbps fiber port with SC connector(s).

- Plug-and-play operation

RoHS

Compliant