LG ND3520 Owner's Manual

17

Oper

ating

Before you start the pairing procedure, make 
sure the Bluetooth feature is turned on in to your 
Bluetooth device. Refer to your Bluetooth device’s 
user guide. Once a pairing operation is performed, 
it does not need to be performed again.
1.  Select the Bluetooth function by using the  

PFUNCTION or F. 

Appears “BT” and “BT READY” in the display 
window.

2.  Operate the Bluetooth device and perform the 

pairing operation. When searching for this unit 
with the Bluetooth device, a list of the devices 
found may appear in the Bluetooth device 
display depending on the type of Bluetooth 
device.Your unit appears as “LG AUDIO ND3520”.

3.  Enter the PIN code. 

PIN code : 0000

4.  When this unit successfully is connected with 

your Bluetooth device, Bluetooth LED of this 
unit lights up and appears “PAIR”.

Depending on the Bluetooth device type, 
some device have a different pairing way.

 

,

Note

5.  Listen to music. 

To play a music stored on your Bluetooth device, 
refer to your Bluetooth device’s user guide.

 

y Sound from the main set can be distorted 

if you raise the volume of Bluetooth device 
up to two-thirds or more.

 

y When you use the bluetooth function, 

adjust the volume of a bluetooth device to 
a proper level to listen to.

 

,

Note

 

y After searching for this unit on your 

Bluetooth device, pair the Bluetooth device 
with this unit. Then play the  file you want.

 

y The sound may be interrupted when 

the connection interfered by the other 
electronic wave.

 

y You cannot control the Bluetooth device 

with this unit.

 

y Pairing is limited one Bluetooth device per 

one unit and multi-pairing is not supported.

 

y Although the distance between your 

Bluetooth and the set is less than 10m, there 
are obstacles between both, your Bluetooth 
device cannot be connected.

 

y Depending on the type of the device, 

you may not be able to use the Bluetooth 
function.

 

y You can enjoy wireless system using phone, 

MP3, Notebook, etc..

 

y When not connected the Bluetooth, “BT” 

and “BT READY” appears on the display 
window.

 

y The Electrical malfunction due to devices 

using same frequency such as Medical 
equipment, Microwaves or wireless 
LAN devices, the connection will be 
disconnected.

 

y When someone stands and interrupts 

communication between Bluetooth device 
and the player, the connection will be 
disconnected.

 

y If the gotten away of the distance between 

Bluetooth and the unit, the sound quality 
is lower and lower. The connection will 
disconnect when the space between the 
Bluetooth and the unit gets out of the 
operating range of Bluetooth.

 

y The device with Bluetooth wireless 

technology is disconnected, if you turn off 
the main unit or put the device away from 
the main unit more than 10m.

 

y If the Bluetooth device is disconnected, you 

should connect the Bluetooth device to 
your unit.

 

,

Note

ND3520-NM.BCANLLK-6273_ENG.indd   17

2012-04-20     5:08:39