LG 80002 Owner's Manual

This lamp blinks at the start of each use just to remind
you to clean the filter.

1. Open the door.

2. Pull the filter

out.

3. Clean the filter

by using a
vacuum cleaner
or rinsing under
the tap.

It’s not very difficult to care for your dryer. All you
have to do is to follow the information below.

Clean lint filter after each use and check it before each
use. It should also be cleaned if the Clean Filter light
lights and the buzzer sounds during operation of the
dryer: Cleaning or emptying the filter will reduce
drying times and energy consumption and lengthen
the dryer life.

4. Replace the

filter.
- Push the

filter all the
way down to
avoid
Interference
with the
door.

This device senses the moisture remaining in the
laundry during operation, which means it must be
cleaned all the time. The main reason of cleaning
this part is to remove the build-up of lime scale on
the surface of sensor. Wipe the sensors inside drum
(shown in the picture).

5. Close the door.

In the case you wash the lint screen using water,
dry it thoroughly.

Note