LG 24MP67HQ-P User Guide

Page of 43
13
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm 
on each side and from the wall. Detailed 
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, 
attach Wall mounting interface (optional parts) to 
the back of the set.
When you install the Monitor set using a wall 
mounting interface (optional parts), attach it 
carefully so it will not drop.
1
  If you use screw longer than standard, the moni-
tor might be damaged internally. 
2
  If you use improper screw, the product might be 
damaged and drop from mounted position. 
    In this case, LG Electronics is not responsible 
for it. 
10 cm
10 cm
10 cm
10 cm
 
y
Disconnect the power cord first, and then 
move or install the Monitor set. Otherwise 
electric shock may occur.
 
y
If you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 
 
y
Use only an authorized LG wall mount 
and contact the local dealer or qualified 
personnel.
 
y
 Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 
 
y
 Use only screws and wall mounts that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.
 
y
Screw length from outer surface of back 
cover should be under 8mm. 
 
y
Use the screws that are listed on the VESA 
standard screw specifications.
 
y
The wall mount kit will include an installation 
manual and necessary parts.
 
y
The wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.
 
y
The length of screws may differ depending 
on the wall mount. Be sure to use the proper 
length.
 
y
For more information, refer to the 
instructions supplied with the wall mount.
CAUTION
NOTE
Back Cover
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
Max.8mm
 
y
Wall Mount (A x B)
A
B
Model
 
Wall Mount 
(A x B)
75  x 75
100  x 100
Standard 
screw
M4 x L10
Number of 
screws
4
Wall Mount 
Plate
(Optional) 
RW120
22MP67D
22MP67HQ
22MP67VQ
23MP67D
23MP67HQ
23MP67VQ
24MP67HQ
24MP67VQ
27MP67VQ
27MP67HQ