LG 24MP67HQ-P User Guide

Display image is incorrect
The screen color is mono or 

abnormal.

 

y

Check if the signal cable is properly connected and use a screwdriver 
to fasten if necessary.

 

y

Make sure the video card is properly inserted in the slot.

 

y

Set the color setting higher than 24 bits (true color) at 

Control Panel 

► Settings.

The screen blinks.

 

y

Check if the screen is set to interlace mode and if yes, change it to the 
recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display 

driver?

 

y

Be sure to install the display driver from the display driver CD (or 
diskette) that comes with your display. Or, you can also download the 
driver from our web site: http://www.lg.com.

 

y

Make sure to check if the video card supports Plug&Play function.

 

y

Check 

Control Panel ► Display ► Settings and see if the frequency or the resolution were 

changed.  If yes, readjust the video card to the recommend resolution.

 

y

If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the 
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

 

y

The setting method can differ by computer and O/S (Operation System), and resolution mentioned 
above may not be supported by the video card performance. In this case, please ask to the computer 
or the video card manufacturer.

The screen is flickering.
Did you select the recommended 

resolution?

 

y

If the selected resolution is HDMI 

1080i 60/50 Hz, the screen may 

be flickering. Change the resolution to the recommended resolution 

1080P.

22MP67HQ 23MP67HQ 24MP67HQ

22MP67VQ

27MP67HQ

23MP67VQ 24MP67VQ 27MP67VQ