LG S12SWC User Guide
15
ADVANCED FUNCTIONS
ENGLISH
Operating the air conditioner
without the remote control
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1
Open the front cover.
- Lift up both sides of the cover slightly.
2
Press the On/Off button.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
room temperature.
- For cooling-only models, the temperature
is set to 22°C (71.6°F).
* The feature can be changed according to
type of model.
ON/OFF
button
button
Room temp.
Set temp.
Operation
mode
Below
21°C(69.8°F)
21°C(69.8°F)
24°C(75.2°F)
Heating
operation
operation
Above
21°C(69.8°F)
And
Below
24°C(75.2°F)
21°C(69.8°F)
And
Below
24°C(75.2°F)
23°C(73.4°F)
Dehumidify-
ing operation
ing operation
Above
24°C(75.2°F)
24°C(75.2°F)
22°C(71.6°F)
Cooling
operation
operation
* The feature can be changed according to
type of model.
NOTE
!
• This function may not be supported,
depending on the model.
• Possible, Different temperature is dis-
played on between remote controller
and air conditioner during operation.
and air conditioner during operation.
NOTE
!
This function may not be supported,
depending on the model.
depending on the model.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
unit display screen.
1
Press
\
to turn on/off the lamp on the
front grill.
°C/°F Conversion
The unit converses from °C to °F or from °F
to °C if Room Temperature KEY is pressed for
5 seconds.
to °C if Room Temperature KEY is pressed for
5 seconds.
Energy saving cooling mode
This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable
environment.
ing cooling and increases the set temperature
to the optimal level for a more comfortable
environment.
1
Press
|
to turn the power on.
2
Press
f
repeatedly to select the cooling
operation.
3
Press
P
.
-
G
is displayed on the display screen.