LG HB906SB User Manual

55

Oper

ating

Be sure that the antennas are connected.  
(Refer to the page 21)

1.  Press RADIO&INPUT until TUNER (FM/AM) 

appears in the display window. The last received 
station is tuned in.

2.  Press and hold TUNING (-/+) for about two 

seconds until the frequency indication starts to 
change. Scanning stops when the unit tunes in 
a station. Or Press TUNING (-/+) repeatedly.

3.  Adjust the volume by rotating VOLUME on 

the front panel or by pressing VOL (+/-) on the 
remote control.

You can preset 50 stations for FM/AM.  
Before tuning, make sure that you have turned 
down the volume.
1.  Press RADIO&INPUT until the TUNER (FM/AM) 

appears in the display window.

2.  Select the desired frequency by using TUNING 

(-/+).

3.  Press ENTER (b) a preset number will flash in 

the display window.

4.  Press PRESET (-/+) to select the preset number 

you want.

5.  Press ENTER (b). The station is stored.
6.  Repeat the steps 2 to 5 to store other stations.

1.  Press PRESET (- / +) to select a preset number 

you want to delete.

2.  Press CLEAR, the preset number will blink in the 

display window.

3.  Press CLEAR again, to delete the selected preset 

number.

Press and hold CLEAR for two seconds.  
“ERASE ALL” will flash up. Press CLEAR again. Then all 
the saved stations are deleted.

Press B (blue) (MONO/STEREO) colored button on 
the remote control. This will change the tuner from 
stereo to mono and usually improve the reception.