Perle SPEED1 LE 04003050 User Manual

 

Page 30

Chapter 2 Installing Drivers and Host Cards

To remove any SPEED LE or SPEED LE Express card from your system, proceed as 
follows;

1. Turn off the power to your system and unplug the power cord.

2. Remove the system cover to expose the inside of the connector panel for host cards.

3. Disconnect any cables or connector boxes connected to the card you want to remove.

4. Undo the securing screw for the host card you want to remove then lift the card out of its 

slot as shown in the next picture.

5. Repeat from step 

 until you have removed all the host cards you want.

6. Replace and secure the system cover.

7. Plug in the mains lead and turn on the power.

Removal of SPEED LE or SPEED LE Express card  is now complete.

Note

The exact location of host card slots varies for different systems, for exact mechanical 
details of your system, refer to your system documentation.