Perle SPEED1 LE 04003050 User Manual

SPEED LE Serial Adaptor  
Windows 2000/XP/Server 2003/Vista/Server 2008

Page 55

In the event of any error messages, check the Windows Event Log. Also open the Windows 
Device Manager and check for warming icons on the installed hardware. See your Windows 
2000, Windows XP, Windows Server 2003, or Windows Server 2008 user documentation or 
help system for details.

For general problems, see 

Machine fails to boot.

1. Turn off your machine, remove SPEED LE card(s) 

and reboot. See 

2. Try installing a different host card in case the one 

currently installed is faulty. See 

.

Windows operating system fails while loading 
and the system hangs.

1. Reboot machine and then switch to the last 

known good configuration.

2. Check for resource conflicts or faulty hardware.

Windows operating system fails while loading 
and displays a blue screen.

1. Note the five hexadecimal numbers at the top line 

of the screen 

2. Reboot your machine and then switch to the last 

known good configuration.

3. Check for resource conflicts or faulty hardware.

Operating system loads OK, but SPEED driver 
or another driver fails to boot

1. Run Windows Device Manager to find available 

IRQ and memory addresses.

SPEED LE ports do not work after installation.

1. Check the Windows Event Log and follow the 

suggested actions. 

SPEED Windows driver fails during normal 
operation, symptom: blue screen

1. Note the five hexadecimal numbers displayed at 

the top line of the screen.

2. Reboot your machine and then switch to the last 

known good configuration.

3. Check for resource conflicts or faulty hardware.

SPEED Windows driver fails during normal 
operation, symptoms either:

 

 

black screen, machine reboots or system hangs

1. Contact Technical Support. See