IMC Networks TP-TX/FX-CWDM-SM1590-SC 856-19674 User Manual

• Smallest stand-alone fiber optic network

interface device

• VLAN compatible - secure and separate

customer traffic

• VLAN filtering

• Supports passive 802.3ah OAM (Operations,

Administration & Management)

• Bandwidth limiting per port/per direction

• Extra Tagging (Q-in-Q)

• -48 VDC terminal for Telco applications*

• Supports Remote Loopback with MAC

Address Swap

• Last Gasp SNMP Trap support*

• Carrier-grade SNMP management and

line provisioning

• Link Loss and Loopback troubleshooting

• Free iView² software allows remote

bandwidth management and traffic

prioritization

• Extended temperature functionality,

up to -45° to +85° C

• Multiple power options: AC, DC

and Power over Ethernet (PoE)

• DIN Rail mountable

(DIN clips sold separately)

Transparent LAN service providers require remote management

capabilities, and must be able to isolate management traffic and

customer  data.    The  compact  IE-MiniFiberLinX-II,  functioning

as  a  more  advanced  Network  Interface  Device  (NID),  is

designed  for  operation  by  service  providers  and  campus

network administrators. It provisions point-to-point fiber optic

connections  and  provides  a  remote  network  interface  at  the

customer’s location that monitors the entire link between two

locations.
The  IE-MiniFiberLinX-II  for  fiber  optic  networks  allows  service

providers  to  deliver  managed,  high-bandwidth  “triple  play”

voice, video and data services to the customer premises.

As  a  copper-to-fiber  media  converter,  the    IE-MiniFiberLinX-II

allows  low-cost  copper  switches  to  connect  to  the  fiber  line.

Offering  unparalleled  flexibility,  the  it  supports  multiple  fiber

types including multi-mode and single-mode as well as single-

strand  fiber,  doubling  the  capacity  of  installed  fiber.    Coarse

Wavelength Division Multiplexing (CWDM) functionality is also

an option.
The  IE-MiniFiberLinX-II  comes  equipped  with  one  100  Mbps

fiber  port  for  data  and  management,  one  10/100  twisted  pair

port  for  customer  data,  as  well  as  an  RS-232  port  for  local

configuration on the unit during installation.
The IE-MiniFiberLinX-II supports multiple powering options. Use

the included AC power adapter or use the DC terminal block.

Additionally,  the  IE-MiniFiberLinX-II  with  Telco  Power  models

support  -48  VDC  office  batteries  that  are  commonly  used  in

Telco applications*. Also compliant with the IEEE 802.3af Power

over  Ethernet  standard,  the  IE-MiniFiberLinX-II  can  function

as a Powered Device (PD) to draw power when connected to

802.3af-compliant Power Sourcing Equipment (PSE).

RoHS

Compliant

* For models with Telco Power & Telco Power with